Dell Vostro 3591 With optical drive Service Manual - Page 53

Display bezel, Removing the display bezel

Page 53 highlights

Next steps 1. Replace the WLAN 2. Replace the base cover 3. Replace the optical drive assembly 4. Replace the SD memory card 5. Follow the procedure in after working inside your computer Display bezel Removing the display bezel Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the optical drive assembly 4. Remove the base cover 5. Remove the display assembly Steps 1. Pry the inner top side of the display bezel [1]. 2. Continue to pry the inner left and inner right edges of the display bezel [2]. 3. Pry up the bottom inner edge of the display bezel and lift the bezel off the display assembly [3]. Installing the display bezel Steps Align the display bezel with the display back-cover and antenna assembly, and then gently snap the display bezel into place [1]. Removing and installing components 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90

Next steps
1.
Replace the
WLAN
2.
Replace the
base cover
3.
Replace the
optical drive assembly
4.
Replace the
SD memory card
5.
Follow the procedure in
after working inside your computer
Display bezel
Removing the display bezel
Prerequisites
1.
Follow the procedure in
before working inside your computer
2.
Remove the
SD memory card
3.
Remove the
optical drive assembly
4.
Remove the
base cover
5.
Remove the
display assembly
Steps
1.
Pry the inner top side of the display bezel [1].
2.
Continue to pry the inner left and inner right edges of the display bezel [2].
3.
Pry up the bottom inner edge of the display bezel and lift the bezel off the display assembly [3].
Installing the display bezel
Steps
Align the display bezel with the display back-cover and antenna assembly, and then gently snap the display bezel into place [1].
Removing and installing components
53