Dell Vostro 3591 With optical drive Service Manual - Page 23
Solid-state drive/Intel Optane (Optional), Removing the M.2 2230 Solid-state drive
View all Dell Vostro 3591 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Next steps 1. Connect the battery cable to the connector on the system board. 2. Replace the base cover 3. Replace the optical drive assembly 4. Replace the SD memory card 5. Follow the procedure in after working inside your computer Solid-state drive/Intel Optane (Optional) Removing the M.2 2230 Solid-state drive Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the optical drive assembly 4. Remove the base cover 5. Disconnect the battery cable from the connector on the system board. Steps 1. Loosen the captive screw that secures the thermal plate to the palmrest and keyboard assembly [1]. 2. Remove the single (M2x3) screw that secures the thermal plate to the palmrest and keyboard assembly [2]. 3. Slide and remove the thermal plate from the solid-state drive [3]. Removing and installing components 23