Dell Vostro 420 Service Manual - Page 8
Back to Contents System Setup Program, System Setup, Program - sound driver
UPC - 683728233853
View all Dell Vostro 420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
NOTE: For information on installing drivers and software for your card, see the documentation that shipped with the card. Type of Card Sound Card Installed 1. Enter the system setup program (see System Setup Program for instructions). 2. Go to Integrated Peripherals, select Onboard Audio Controller, and then change the setting to Disabled. 3. Connect the external audio devices to the sound card's connectors. Removed 1. Enter the system setup program (see System Setup Program for instructions). 2. Go to Integrated Peripherals, select Onboard Audio Controller, and then change the setting to Enabled. 3. Connect the external audio devices to the computer's back panel connectors. Network Card 1. Enter the system setup program (see System Setup Program for instructions). 2. Go to Integrated Peripherals, select Onboard LAN Controller, and then change the setting to Disabled, if you prefer not to use both interfaces. 3. Connect the network cable to the network card's connector. 1. Enter the system setup program (see System Setup Program for instructions). 2. Go to Integrated Peripherals, select Onboard LAN Controller, and then change the setting to Enabled. 3. Connect the network cable to the network connector on the system board. Back to Contents Page