Dell Vostro 5301 Service Manual - Page 26
Removing the 2280 solid-state drive, About this task, Steps, Next steps, Prerequisites
![]() |
View all Dell Vostro 5301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
About this task The following image indicates the location of the solid-state drive and provides a visual representation of the installation procedure. Steps 1. Lift the protective tape and peel the Mylar that covers the 2230 solid-state drive. 2. Slide the 2230 solid-state drive into the solid-state drive slot. 3. Slide the solid-state drive bracket and align the screw hole on the solid-state drive bracket with the screw hole on the system board. 4. Replace the screw (M2x3) that secures the solid-state drive bracket to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing the 2280 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 26 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-5301-service-manual-ccad318/26.png)