Dell Vostro 5301 Service Manual - Page 45
Installing the I/O board
![]() |
View all Dell Vostro 5301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Steps 1. Peel the tape that secures the I/O-board cable to the I/O board. 2. Open the latch and disconnect the I/O-board cable from the I/O board. 3. Peel the tape that secures the I/O-board cable to the fan. 4. Remove the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly. 5. Lift the I/O board off the palm-rest and keyboard assembly. Installing the I/O board Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of I/O board and provides a visual representation of the installation procedure. Disassembly and reassembly 45
![](/manual_guide/products/dell-vostro-5301-service-manual-ccad318/45.png)
Steps
1.
Peel the tape that secures the I/O-board cable to the I/O board.
2.
Open the latch and disconnect the I/O-board cable from the I/O board.
3.
Peel the tape that secures the I/O-board cable to the fan.
4.
Remove the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
5.
Lift the I/O board off the palm-rest and keyboard assembly.
Installing the I/O board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of I/O board and provides a visual representation of the installation procedure.
Disassembly and reassembly
45