Dell Vostro 5301 Service Manual - Page 41
Installing the heat sink, Steps, Prerequisites
View all Dell Vostro 5301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Steps 1. Peel off the Mylar that covers the heat sink on the system board. 2. In reverse sequential order (as indicated on the heat sink), loosen the four captive screws that secure the heat sink to the system board. 3. Lift the heat sink off the system board. Installing the heat sink Prerequisites CAUTION: Incorrect alignment of the heat sink can damage the system board and processor. NOTE: If either the system board or the heat sink is replaced, use the thermal pad/paste provided in the kit to ensure that thermal conductivity is achieved. About this task The following image indicates the location of the heat sink and provides a visual representation of the installation procedure. Disassembly and reassembly 41
Steps
1.
Peel off the Mylar that covers the heat sink on the system board.
2.
In reverse sequential order (as indicated on the heat sink), loosen the four captive screws that secure the heat sink to the
system board.
3.
Lift the heat sink off the system board.
Installing the heat sink
Prerequisites
CAUTION:
Incorrect alignment of the heat sink can damage the system board and processor.
NOTE:
If either the system board or the heat sink is replaced, use the thermal pad/paste provided in the kit to ensure that
thermal conductivity is achieved.
About this task
The following image indicates the location of the heat sink and provides a visual representation of the installation procedure.
Disassembly and reassembly
41