Dell Vostro 5301 Service Manual - Page 38

Touchpad, Removing the touchpad

Get Dell Vostro 5301 PDF manuals and user guides View all Dell Vostro 5301 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Steps 1. Place the display assembly on a clean surface. 2. Align and place the palm-rest and keyboard assembly at an angle with the display assembly. 3. Align the screw holes on the display hinges with the screw holes on the palm-rest and keyboard assembly. 4. Replace the screw (M2x2) that secures the right hinge to the system board and the palm-rest and keyboard assembly. 5. Replace the two screws (M2x2) that secure the left hinge to the palm-rest and keyboard assembly. 6. Lift the mylar that covers the display-cable connector on the system board. 7. Connect the display cable to the connector on the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Touchpad Removing the touchpad Prerequisites 1. Follow the procedure in Before working inside your computer. 38 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Steps
1.
Place the display assembly on a clean surface.
2.
Align and place the palm-rest and keyboard assembly at an angle with the display assembly.
3.
Align the screw holes on the display hinges with the screw holes on the palm-rest and keyboard assembly.
4.
Replace the screw (M2x2) that secures the right hinge to the system board and the palm-rest and keyboard assembly.
5.
Replace the two screws (M2x2) that secure the left hinge to the palm-rest and keyboard assembly.
6.
Lift the mylar that covers the display-cable connector on the system board.
7.
Connect the display cable to the connector on the system board.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Touchpad
Removing the touchpad
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
38
Disassembly and reassembly