Dell Vostro 5320 Service Manual - Page 18
Removing the M.2 2280 solid-state drive, sleep state.
View all Dell Vostro 5320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Removing the M.2 2280 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. CAUTION: To prevent data loss, do not remove the solid-state drive while the computer is turned on or in sleep state. 2. Remove the base cover. NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer. About this task NOTE: This procedure applies only to computers shipped with a M.2 2280 solid-state drive installed. NOTE: The M.2 card installed on your computer will depend on the configuration ordered. The supported card configurations on the M.2 card slot are: ● M.2 2230 solid-state drive + 2230 mounting bracket ● M.2 2280 solid-state drive The following image(s) indicate the location of the M.2 2280 solid-state drive and provides a visual representation of the removal procedure. Steps 1. Lift the Mylar that covers the M.2 2280 solid-state drive. 2. Remove the screw (M2x2) that secures the M.2 2280 solid-state drive to the palm-rest and keyboard assembly. 3. Slide and remove the M.2 2280 solid-state drive from the M.2 solid-state drive slot on the system board. 18 Removing and installing components