Dell Vostro 5320 Service Manual - Page 30
Coin-cell battery, Removing the coin-cell battery
![]() |
View all Dell Vostro 5320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Steps 1. Using the alignment posts, place the battery on the palm-rest and keyboard assembly. 2. Lift the Mylar to access the battery connector and connect the battery cable to the system board. 3. Place the Mylar over the M.2 solid-state drive. 4. Replace the five screws (M2x3) that secure the battery to the palm-rest and keyboard assembly. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Coin-cell battery Removing the coin-cell battery Prerequisites 1. Follow the procedure in Before working inside your computer. CAUTION: Removing the coin-cell battery resets the BIOS setup program's settings to default. It is recommended that you note the BIOS setup program's settings before removing the coin-cell battery. 2. Remove the base cover. NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer. About this task The following image(s) indicate the location of the coin-cell battery and provides a visual representation of the removal procedure. 30 Removing and installing components
![](/manual_guide/products/dell-vostro-5320-service-manual-d6df0b3/30.png)