Dell Vostro 5370 Ownerss Manual - Page 21

Installing the Input output board, Power button, Removing the power button

Get Dell Vostro 5370 PDF manuals and user guides View all Dell Vostro 5370 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Installing the Input output board 1 Place the Input output(I/O) board to its slot in the system. 2 Replace the two M2.0 x 2 screws to secure the I/O board to the system board. 3 Connect the I/O cable and close the latch to secure it to the I/O board. 4 Push down the display hinge above the I/O board and secure it with the two M2.5 x 6 screws to the system. 5 Install the: a WLAN b base cover 6 Follow the procedure in After working inside your computer. Power button Removing the power button 1 Follow the procedure in Before working inside your computer. 2 Remove the: . a base cover b WLAN card c solid state drive(SSD) d Input output(I/O) board 3 To remove the power button: a Remove the two M2.0 x 2.5 screws securing the power button to the system [1]. b Lift the button away from the system [2]. Removing and installing components 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Installing the Input output board
1
Place the Input output(I/O) board to its slot in the system.
2
Replace the two M2.0 x 2 screws to secure the I/O board to the system board.
3
Connect the I/O cable and close the latch to secure it to the I/O board.
4
Push down the display hinge above the I/O board and secure it with the two M2.5 x 6 screws to the system.
5
Install the:
a
WLAN
b
base cover
6
Follow the procedure in
After working inside your computer
.
Power button
Removing the power button
1
Follow the procedure in
Before working inside your computer
.
2
Remove the: .
a
base cover
b
WLAN card
c
solid state drive(SSD)
d
Input output(I/O) board
3
To remove the power button:
a
Remove the two M2.0 x 2.5 screws securing the power button to the system [1].
b
Lift the button away from the system [2].
Removing and installing components
21