Dell Vostro 5370 Ownerss Manual - Page 34
Installing display hinge, DC-in, Removing the DC-in
![]() |
View all Dell Vostro 5370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installing display hinge 1 Place the display hinge cover on the display assembly. 2 Replace the screws to secure the display hinge cover to the display assembly. 3 Install the: a display panel b display bezel c display assembly d WLAN card e base cover 4 Follow the procedure in After working inside your computer. DC-in Removing the DC-in 1 Follow the procedure in Before working inside your computer. 2 Remove the: a base cover b WLAN card c display assembly 3 To remove the DC-in: a Remove the 3 M2.5 x 6 screws that secure the right display hinge bracket to the system [1]. b Lift the hinge bracket [2]. c Disconnect the power-adapter port cable from the connector in the system board [3]. 34 Removing and installing components
![](/manual_guide/products/dell-vostro-5370-ownerss-manual-0536463/34.png)
Installing display hinge
1
Place the display hinge cover on the display assembly.
2
Replace the screws to secure the display hinge cover to the display assembly.
3
Install the:
a
display panel
b
display bezel
c
display assembly
d
WLAN card
e
base cover
4
Follow the procedure in
After working inside your computer
.
DC-in
Removing the DC-in
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
base cover
b
WLAN card
c
display assembly
3
To remove the DC-in:
a
Remove the 3 M2.5 x 6 screws that secure the right display hinge bracket to the system [1].
b
Lift the hinge bracket [2].
c
Disconnect the power-adapter port cable from the connector in the system board [3].
34
Removing and installing components