Dell Vostro 5370 Ownerss Manual - Page 26
Installing touchpad, Display assembly, Removing display assembly
View all Dell Vostro 5370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
d Remove the three M2.0 x 2 screws that secure the touchpad support bracket to the system and lift the touchpad away from system [1, 2]. Installing touchpad 1 Replace the three screws to secure the touchpad support bracket to the system. 2 Connect the touchpad cable to the connector in the system. 3 Replace the four screws to secure the touchpad to the system. 4 Paste the adhesive to the touchpad. 5 Install the: a battery b base cover 6 Follow the procedure in After working inside your computer. Display assembly Removing display assembly 1 Follow the procedure in Before working inside your computer. 2 Remove the: a base cover b WLAN card 3 To remove the display assembly: a Unroute the WLAN cable [1], and disconnect the eDP cable from the connector in the system board [2]. 26 Removing and installing components