Dell Vostro 5490 Service Manual - Page 37
Installing the system fan
![]() |
View all Dell Vostro 5490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Steps 1. Lift the latch and disconnect the input and output board cable from the connector on the system board. 2. Unroute the input and output board cable from the retention clips. 3. Disconnect the system fan cable from the connector on the system board. 4. Remove the two (M2x3) screws that secure the system fan to the palmrest assembly. 5. Lift the system fan off the palmrest assembly. Installing the system fan Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The figure indicates the location of the system fan and provides a visual representation of the installation procedure. Steps 1. Locate the system fan slot on your computer. 2. Align and place the system fan into the slot on the palmrest assembly. Removing and installing components 37
![](/manual_guide/products/dell-vostro-5490-service-manual-a8abb70/37.png)