Dell Vostro 5490 Service Manual - Page 49

Close the right display hinge and replace the two M2.5x5 screws to secure the right display hinge to the palmrest assembly.

Get Dell Vostro 5490 PDF manuals and user guides View all Dell Vostro 5490 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Steps 1. Locate the power button slot on your computer. 2. Align and place the power button into the slot on your computer. 3. Replace the two (M2x2) screws and the two (M2x3) screws to secure the power button to the palmrest assembly. 4. Adhere the adhesive tape above the power button. 5. Connect the power button cable to the connector on the system board and close the latch. 6. Close the right display hinge and replace the two (M2.5x5) screws to secure the right display hinge to the palmrest assembly. Next steps 1. Install the Input and output board. 2. Install the system fan. 3. Install the battery. 4. Install the base cover. 5. Follow the procedure in After working inside your computer. Removing and installing components 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Steps
1.
Locate the power button slot on your computer.
2.
Align and place the power button into the slot on your computer.
3.
Replace the two (M2x2) screws and the two (M2x3) screws to secure the power button to the palmrest assembly.
4.
Adhere the adhesive tape above the power button.
5.
Connect the power button cable to the connector on the system board and close the latch.
6.
Close the right display hinge and replace the two (M2.5x5) screws to secure the right display hinge to the palmrest assembly.
Next steps
1.
Install the
Input and output board
.
2.
Install the
system fan
.
3.
Install the
battery
.
4.
Install the
base cover
.
5.
Follow the procedure in
After working inside your computer
.
Removing and installing components
49