Dell Vostro 5490 Service Manual - Page 52
Display assembly, Removing the display assembly
View all Dell Vostro 5490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
2. Align and place the power button with fingerprint into the slot on your computer. 3. Replace the two (M2x3) screws to secure the power button with fingerprint to the palmrest assembly. 4. Replace the two (M2x2) screws to secure the power button bracket to the palmrest assembly. 5. Connect the fingerprint reader cable to the connector on the power button cable. 6. Connect the power button cable to the connector on the system board. 7. Close the right display hinge and replace the two (M2.5x5) screws to secure the right display hinge to the palmrest assembly. Next steps 1. Install the Input and output board. 2. Install the system fan. 3. Install the battery. 4. Install the base cover. 5. Follow the procedure in After working inside your computer. Display assembly Removing the display assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the system fan. About this task The figure indicates the location of the display assembly and provides a visual representation of the removal procedure. 52 Removing and installing components