Dell Vostro 5490 Service Manual - Page 40

Replace the three M2x2 screws to secure the touchpad bracket to the touchpad.

Get Dell Vostro 5490 PDF manuals and user guides View all Dell Vostro 5490 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Steps 1. Locate the touchpad slot on your computer. 2. Align and place the touchpad into the slot on your computer. 3. Replace the four (M2x2) screws to secure the touchpad to the plamrest. 4. Connect the touchpad cable to the connector on the system board and secure the latch. 5. Adhere the adhesive to secure the touchpad to the palmrest. 6. Align and place the touchpad bracket. 7. Replace the three (M2x2) screws to secure the touchpad bracket to the touchpad. 8. Adhere the adhesive to route the speaker cable. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. 40 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Steps
1.
Locate the touchpad slot on your computer.
2.
Align and place the touchpad into the slot on your computer.
3.
Replace the four (M2x2) screws to secure the touchpad to the plamrest.
4.
Connect the touchpad cable to the connector on the system board and secure the latch.
5.
Adhere the adhesive to secure the touchpad to the palmrest.
6.
Align and place the touchpad bracket.
7.
Replace the three (M2x2) screws to secure the touchpad bracket to the touchpad.
8.
Adhere the adhesive to route the speaker cable.
Next steps
1.
Install the
battery
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
40
Removing and installing components