Dell Vostro 5501 Service Manual - Page 30
Coin-cell battery, Removing the coin-cell battery
![]() |
View all Dell Vostro 5501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Steps 1. Place the thermal support bracket using the alignment posts. 2. Replace the two screws (M1.6x2) to tighten the thermal support bracket. 3. Depending on the type of solid-state drive (M.2 2230/ M.2 2280), align and insert the SSD support bracket into the support bracket slot. 4. Install the solid-state drive. Next steps 1. Install the SSD-2. 2. Connect the battery. 3. Install the base cover. 4. Follow the procedure in after working inside your computer. Coin-cell battery Removing the coin-cell battery Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery. NOTE: Removing the coin-cell battery resets the BIOS setup program settings to default. It is recommended that you note the BIOS setup program settings before removing the coin-cell battery. About this task The figure indicates the location of the coin-cell battery and provides a visual representation of the removal procedure. Steps 1. Disconnect the coin-cell battery cable from the I/O board. 2. Peel the coin-cell battery off the palm-rest and keyboard assembly. 30 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-5501-service-manual-64a2a7d/30.png)