Dell Vostro 5501 Service Manual - Page 48
Installing the DC-in port - laptop
![]() |
View all Dell Vostro 5501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Steps 1. Locate the DC-in port on your computer. 2. Remove the three (M2.5x3.5) screws, and lift the metal hinge bracket covering the display connector. 3. Remove the single (M2x3) screw, and lift the DC-in port. 4. Peel the transparent sticker, and disconnect the DC-in cable from its connector on the system board. 5. Peel the adhesive tape off. 6. Remove the DC-in port from the palm-rest and keyboard assembly. Installing the DC-in port Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The figure indicates the location of the DC-in port and provides a visual representation of the installation procedure. Steps 1. Locate the DC-in port on your laptop. 2. Replace the single (M2x3) screw, and connect the DC-in cable to the system board. 3. Adhere the adhesive tape and the transparent sticker. 4. Lower the metal hinge and align the screw holes on the system board. 5. Replace the three (M2.5x3.5) screws and fix the metal hinge to cover the display connector. 48 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-5501-service-manual-64a2a7d/48.png)