Dell Vostro 5501 Service Manual - Page 39
Steps, Next steps, Place the mylar cover back.
![]() |
View all Dell Vostro 5501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Steps 1. Slide and place the system fan on the palm-rest and keyboard assembly. 2. Align the screw holes on the system fan with the screw holes on the palm-rest and keyboard assembly. 3. Replace the two (M2x2) screws to secure the system fan to the palm-rest and keyboard assembly. 4. Connect the system fan cable to the system board. 5. Route the I/O cable underneath the system fan and connect on the system board. 6. Place the mylar cover back. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in after working inside your computer. Disassembly and reassembly 39
![](/manual_guide/products/dell-vostro-5501-service-manual-64a2a7d/39.png)
Steps
1.
Slide and place the system fan on the palm-rest and keyboard assembly.
2.
Align the screw holes on the system fan with the screw holes on the palm-rest and keyboard assembly.
3.
Replace the two (M2x2) screws to secure the system fan to the palm-rest and keyboard assembly.
4.
Connect the system fan cable to the system board.
5.
Route the I/O cable underneath the system fan and connect on the system board.
6.
Place the mylar cover back.
Next steps
1.
Install the
battery
.
2.
Install the
base cover
.
3.
Follow the procedure in
after working inside your computer
.
Disassembly and reassembly
39