Dell Vostro 5501 Service Manual - Page 58
Palm-rest and keyboard assembly
![]() |
View all Dell Vostro 5501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Steps 1. Place the display assembly on a clean and flat surface. 2. Align and place the palm-rest and keyboard assembly on the display assembly. 3. Using the alignment posts, close the display hinges. 4. Replace the three screws (M2.5x3.5) that secure the left-display hinge to the system board. 5. Replace the three screws (M2.5x3.5) that secure the right-display hinge to the system board. 6. Connect the display cable on to the connector on the system board and adhere the tape to the system board. Next steps 1. Install the WLAN card. 2. Install the battery. 3. Install the base cover. 4. Follow the procedure in after working inside your computer. Palm-rest and keyboard assembly Removing the palm-rest and keyboard assembly Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the WLAN card. 5. Remove the coin-cell battery. 58 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-5501-service-manual-64a2a7d/58.png)