Dell Vostro 5501 Service Manual - Page 46

Place the USB Type-C port bracket.

Get Dell Vostro 5501 PDF manuals and user guides View all Dell Vostro 5501 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Steps 1. Slide the ports on the system board into the slots on the palm-rest and keyboard assembly and align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly. 2. Replace the two screws (M2x2) that secure the system board to the palm-rest and keyboard assembly. 3. Lower the hinge and replace three screws (M2.5x3.5). 4. Connect the fan cable onto the connector on the system board. 5. Connect the I/O cable onto the connector on the system board and lower the latch. 6. Adhere the tape that secures the I/O cable to the system board. 7. Connect the display cable on to the connector on the system board. 8. Connect the DC-in port cable on to the connector on the system board. 9. Place the USB Type-C port bracket. 10. Replace the two screws (M2x3) that secure the USB Type-C port bracket to the system board. 11. Connect the speaker cable to the system board. 12. Connect the touchpad cable to the system board and close the latch to secure the cable. 13. Connect the keyboard cable to the system board and close the latch to secure the cable. Next steps 1. Install the display assembly. 2. Install the memory module. 3. Install the heat sink. 46 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Steps
1.
Slide the ports on the system board into the slots on the palm-rest and keyboard assembly and align the screw holes on the system
board with the screw holes on the palm-rest and keyboard assembly.
2.
Replace the two screws (M2x2) that secure the system board to the palm-rest and keyboard assembly.
3.
Lower the hinge and replace three screws (M2.5x3.5).
4.
Connect the fan cable onto the connector on the system board.
5.
Connect the I/O cable onto the connector on the system board and lower the latch.
6.
Adhere the tape that secures the I/O cable to the system board.
7.
Connect the display cable on to the connector on the system board.
8.
Connect the DC-in port cable on to the connector on the system board.
9.
Place the USB Type-C port bracket.
10.
Replace the two screws (M2x3) that secure the USB Type-C port bracket to the system board.
11.
Connect the speaker cable to the system board.
12.
Connect the touchpad cable to the system board and close the latch to secure the cable.
13.
Connect the keyboard cable to the system board and close the latch to secure the cable.
Next steps
1.
Install the
display assembly
.
2.
Install the
memory module
.
3.
Install the
heat sink
.
46
Disassembly and reassembly