Dell Vostro 5501 Service Manual - Page 73

Pre-boot behavior Table 14. Pre-boot behavior Option Description Adapter Warnings This option displays warning messages during boot when adapters with little power capacity are detected. • Enable Adapter Warnings-enabled by default Warnings and Errors This option causes the boot process to only pause when warnings and errors are detected rather than stop, prompt, and wait for user input. This feature is useful where the system is being remotely managed. Select one of the following options: • Prompt on Warnings and Errors-enabled by default • Continue on Warnings • Continue on Warnings and Errors NOTE: Errors deemed critical to the operation of the system hardware always stop the system. USB-C Warnings This option enables or disables dock warning messages. Enable Dock Warning Messages - enabled by default. Fastboot This option allows you to configure the speed of UEFI boot process. Select one of the following options: • Minimal • Thorough-enabled by default • Auto Extend BIOS POST Time This option allows you to configure the BIOS POST load time. Select one of the following options: • 0 seconds-enabled by default. • 5 seconds • 10 seconds Mouse/Touchpad This option defines how the system handles mouse and touchpad input. Select one of the following options: • Serial Mouse • PS/2 Mouse • Touchpad and PS/2 Mouse-enabled by default. Virtualization support Table 15. Virtualization Support Option Description Intel Virtualization Technology This option specifies whether the system can run on a Virtual Machine Monitor (VMM). By default, the Enable Intel Virtualization Technology (VT) option is enabled. VT for Direct I/O This option specifies whether the system can perform Virtualization technology for direct I/O; an Intel method for virtualization for memory map I/O. By default, the Enable Intel VT for Direct I/O option is enabled. System setup 73