Dell W-Series 334 Instant 6.4.3.1-4.2 User Guide - Page 104

(Instant AP)(SSID Profile )# enforce-dhcp (Instant AP)(SSID Profile )# end (Instant AP)# commit apply To create a new VLAN assignment rule: (Instant AP)(config)# wlan ssid-profile (Instant AP)(SSID Profile )# set-vlan {{contains|ends-with|equals|matchesregular-expression|not-equals|starts-with} |value-of} (Instant AP)(SSID Profile )# end (Instant AP)# commit apply Configuring Security Settings for a WLAN SSID Profile This section describes the procedure for configuring security settings for an employee or voice network. For information on guest network configuration, see Captive Portal for Guest Access. If you are creating a new SSID profile, configure the WLAN and VLAN settings before defining security settings. For more information, see Configuring WLAN Settings for an SSID Profile on page 98 and Configuring VLAN Settings for a WLAN SSID Profile on page 102. Configuring Security Settings for an Employee or Voice Network You can configure security settings for an employee or voice network by using the Instant UI or CLI. In the Instant UI To configure security settings for an employee or voice network: 1. On the Security tab, specify any of the following types of security levels by moving the slider to a desired level: l Enterprise-On selecting enterprise security level, the authentication options applicable to the enterprise network are displayed. l Personal-On selecting personal security level, the authentication options applicable to the personalized network are displayed. l Open-On selecting Open security level, the authentication options applicable to an open network are displayed: The default security setting for a network profile is Personal. The following figures show the configuration options for Enterprise, Personal, and Open security settings: 104 | Wireless Network Profiles Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide