Dell W-Series 334 Instant 6.4.3.1-4.2 User Guide - Page 391
Table 77, Local profile with VLAN 20
View all Dell W-Series 334 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 391 highlights
Table 77: W-IAP Configuration for Scenario 3-IPSec: Multiple Datacenter Deployment Configuration Steps CLI Commands (ap)(DHCP profile "l3-dhcp")# client-count 200 Local profile with VLAN 20 (ap)(config)# ip dhcp local (ap)(DHCP profile "local")# server-type Local (ap)(DHCP profile "local")# server-vlan 20 (ap)(DHCP profile "local")# subnet 172.16.20.1 (ap)(DHCP profile "local")# subnet-mask 255.255.255.0 (ap)(DHCP profile "local")# lease-time 86400 (ap)(DHCP profile "local")# dns-server 10.1.1.30,10.1.1.50 (ap)(DHCP profile "local")# domain-name arubanetworks.com UI Procedure NOTE: The IP range configuration on each branch will be the same. Each W-IAP will derive a smaller subnet based on the client count scope using the Branch ID (BID) allocated by controller. 5. Create authentication servers for user authentication. The example in the next column assumes 802.1X SSID. (ap)(config)# wlan auth-server server1 (ap)(Auth Server "server1")# ip 10.2.2.1 (ap)(Auth Server "server1")# port 1812 (ap)(Auth Server "server1")# acctport 1813 (ap)(Auth Server "server1")# key "presharedkey" (ap)(Auth Server "server1")# exit See Configuring an External Server for Authentication (ap)(config)# wlan auth-server server2 (ap)(Auth Server "server1")# ip 10.2.2.2 (ap)(Auth Server "server1")# port 1812 (ap)(Auth Server "server1")# acctport 1813 (ap)(Auth Server "server1")# key "presharedkey" 6. Configure wired and wireless SSIDs using the authentication servers and access rules and enable authentication survivability. Configure wired ports to operate in NAT mode and associate VLAN 20 to the wired port profile. (ap)(config) # wired-port-profile wired-port (ap)(wired-port-profile "wired-port")# switchportmode access (ap)(wired-port-profile "wired-port")# allowed-vlan all (ap)(wired-port-profile "wired-port")# native-vlan 20 (ap)(wired-port-profile "wired-port")# no shutdown (ap)(wired-port-profile "wired-port")# access-rulename wired-port (ap)(wired-port-profile "wired-port")# type employee (ap)(wired-port-profile "wired-port")# auth-server server1 (ap)(wired-port-profile "wired-port")# auth-server server2 (ap)(wired-port-profile "wired-port")# dot1x (ap)(wired-port-profile "wired-port")# exit (ap)(config)# enet1-port-profile wired-port See Configuring a Wired Profile and Wireless Network Profiles 391 | IAP-VPN Deployment Scenarios Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide