Dell XPS 13 7390 2-in-1 Service Manual - Page 17
Steps, Using the tape as a pull tab
![]() |
View all Dell XPS 13 7390 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Steps 1. Loosen the captive screw (M1.6x3) that secures the display-cable bracket to the system board. 2. Lift the display-cable bracket off the system board. 3. Peel the tapes that secure the display cable and camera cable to the system board. 4. Using the tape as a pull tab, disconnect the display cable and camera cable from the system board. Removing and installing components 17
![](/manual_guide/products/dell-xps-13-7390-2in1-service-manual-344d3db/17.png)
Steps
1.
Loosen the captive screw (M1.6x3) that secures the display-cable bracket to the system board.
2.
Lift the display-cable bracket off the system board.
3.
Peel the tapes that secure the display cable and camera cable to the system board.
4.
Using the tape as a pull tab, disconnect the display cable and camera cable from the system board.
Removing and installing components
17