Dell XPS 15 9520 Service Manual - Page 23
Removing the solid-state drive 2, Next steps
![]() |
View all Dell XPS 15 9520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4. Align the screw hole on the solid-state drive thermal bracket with the peg on the system board. NOTE: The size of the solid-state drive thermal bracket varies based on the storage type. A solid-state drive thermal bracket that is designed for an M.2 2280 drive cannot accommodate an M.2 2230 drive and vice versa. 5. Replace the screw (M2x2) that secures the solid-state drive thermal bracket and the solid-state drive 1 to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing the solid-state drive 2 Prerequisites 1. Follow the procedure in Before working inside your computer. CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state. 2. Remove the base cover. About this task The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure. Removing and installing components 23
![](/manual_guide/products/dell-xps-15-9520-service-manual-0d71d44/23.png)