Dell XPS 15 9520 Service Manual - Page 41
Apply gentle torque when tightening the two screws M1.6x3 to avoid damaging the screw threads.
View all Dell XPS 15 9520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Steps 1. Slide the palm-rest and keyboard assembly under the display-assembly hinges. 2. Align the screw holes on the palm-rest assembly with the screw holes on the right and left display-assembly hinges. 3. Replace the four screws (M2.5x5.5) that secure the left hinge to the system board and the palm-rest and keyboard assembly. 4. Replace the four screws (M2.5x5.5) that secure the right hinge to the system board and the palm-rest and keyboard assembly. 5. Align the screw holes on the display-assembly cable holder with the screw holes on the palm-rest and keyboard assembly. 6. Connect the touchscreen cable and camera cable to the display-assembly cable . 7. Replace the two screws (M1.6x3) that secure the display-assembly cable holder to the palm-rest and keyboard assembly. NOTE: Apply gentle torque when tightening the two screws (M1.6x3) to avoid damaging the screw threads. 8. Align the screw holes on the display-assembly cable bracket with the screw holes on the system board. 9. Tighten the three captive screws that secure the display-assembly cable bracket to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing and installing components 41