Dell XPS 15 9520 Service Manual - Page 31
Installing the heat sink, Steps, Prerequisites
![]() |
View all Dell XPS 15 9520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Steps 1. In reverse sequential order (as indicated on the heat sink), loosen the four captive screws that secure the heat sink to the system board. 2. Lift the heat sink off the system board. Installing the heat sink Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. CAUTION: Incorrect alignment of the heat sink can damage the system board and processor. NOTE: If either the system board or the heat sink is replaced, use the thermal pad or thermal paste provided in the kit to ensure that thermal conductivity is achieved. About this task The following image indicates the location of the heat sink and provides a visual representation of the installation procedure. Removing and installing components 31
![](/manual_guide/products/dell-xps-15-9520-service-manual-0d71d44/31.png)