Dell XPS 15 9520 Service Manual - Page 25
Installing the M.2 2230 solid-state drive, Steps, Next steps, Prerequisites
![]() |
View all Dell XPS 15 9520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Steps 1. Align the notch on the solid-state drive 2 with the tab on the solid-state drive slot. 2. Gently slide the solid-state drive 2 into the solid-state drive slot. 3. Slide the solid-state drive thermal bracket into the peg on the system board, and align the screw hole on the solid-state drive thermal bracket with the screw hole on the system board. NOTE: The size of the solid-state drive thermal bracket varies based on the storage type. A solid-state drive thermal bracket that is designed for an M.2 2280 drive cannot accommodate an M.2 2230 drive and vice versa. 4. Replace the screw (M2x2) that secures the solid-state drive thermal bracket and the solid-state drive 2 to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Installing the M.2 2230 solid-state drive Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. Removing and installing components 25
![](/manual_guide/products/dell-xps-15-9520-service-manual-0d71d44/25.png)