Dell XPS 17 9700 Service Manual - Page 22
Solid-state drive in SSD1 slot, Removing the M.2 2230 solid-state drive from the SSD1 slot
![]() |
View all Dell XPS 17 9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Solid-state drive in SSD1 slot Removing the M.2 2230 solid-state drive from the SSD1 slot Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this task NOTE: This procedure applies only to computers shipped with an M.2 2230 solid-state drive installed in the SSD1 slot. NOTE: Depending on the configuration ordered, your computer may support an M.2 2230 solid-state drive or an M.2 2280 solid-state drive in the SSD1 slot. The following image indicates the location of the M.2 2230 solid-state drive that is installed in the SSD1 slot and provides a visual representation of the removal procedure. Steps 1. Remove the screw (M2x4) that secures the solid-state drive thermal bracket and the solid-state drive to the system board. 2. Lift the thermal plate off the solid-state drive. 3. Slide and lift the solid-state drive off the SSD1 slot. 22 Removing and installing components
![](/manual_guide/products/dell-xps-17-9700-service-manual-2696484/22.png)