Dell XPS 17 9700 Service Manual - Page 36
Installing the heat sink (for computers shipped with discrete graphics card
![]() |
View all Dell XPS 17 9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Steps 1. In reverse sequential order (as indicated by the numbers on the heat sink), remove the six screws (M2x6.5) that secure the heat sink to the system board. 2. Lift the heat sink off the system board. Installing the heat sink (for computers shipped with discrete graphics card) Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. CAUTION: Incorrect alignment of the heat sink can damage the system board and the processor. NOTE: If either the system board or the heat sink is replaced, use the thermal pad or thermal paste provided in the kit to ensure that there is thermal conductivity. About this task The following image indicates the location of the heat sink and provides a visual representation of the installation procedure. 36 Removing and installing components
![](/manual_guide/products/dell-xps-17-9700-service-manual-2696484/36.png)