Dell XPS 17 9700 Service Manual - Page 29
Fans, Removing the right fan
View all Dell XPS 17 9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Steps 1. Align the notch on the solid-state drive with the tab on the SSD2 slot. 2. Slide the solid-state drive into the SSD2 slot. 3. Using the alignment post, place the solid-state drive thermal bracket over the solid-state drive. 4. Align the screw hole on the solid-state drive thermal bracket with the screw hole on the system board. 5. Replace the screw (M2x4) that secures the solid-state drive thermal bracket and the solid-state drive to the system board. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Fans Removing the right fan Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task The following image indicates the location of the right fan (FAN1) and provides a visual representation of the removal procedure. Removing and installing components 29