Dell XPS 17 9700 Service Manual - Page 9
Removing and installing components, Recommended tools, Screw list
![]() |
View all Dell XPS 17 9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2 Removing and installing components Recommended tools The procedures in this document may require the following tools: ● Phillips screwdriver #0 ● Phillips screwdriver #1 ● Torx #5 (T5) screwdriver ● Plastic scribe Screw list NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced. NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a component. NOTE: Screw color may vary with the configuration ordered. Table 1. Screw list Component Base cover Secured to Screw type Palm-rest and Torx M2.5x4 keyboard assembly Quantity 8 Screw image Battery System board and M2x4 7 palm-rest and keyboard assembly Solid-state drive thermal bracket (SSD1 slot) System board and M2x4 1 palm-rest and keyboard assembly NOTE: This screw is also one of the seven screws that secures the battery to the palm-rest and keyboard assembly. Solid-state drive thermal bracket (SSD2 slot) Palm-rest and M2x4 1 keyboard assembly NOTE: This screw is also one of the seven screws that secures the battery to the Removing and installing components 9
![](/manual_guide/products/dell-xps-17-9700-service-manual-2696484/9.png)