Dell XPS 8930 Service Manual - Page 36
Replacing the solid-state drive, Procedure
View all Dell XPS 8930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
19 Replacing the solid-state drive NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. Procedure 1. Align the notch on the solid-state drive with the tab on the solid-state drive slot. 2. Insert the solid-state drive at a 45-degree angle into the solid-drive drive slot. For more information, see "System-board components". 3. Replace the screw that secures the solid-state drive to the system board. Figure 16. Replacing the solid-state drive 1. tab 3. solid-state drive slot 5. system board 2. notch 4. solid-state drive 6. M2 X 2.5 screw 36 Replacing the solid-state drive