Dell XPS 8930 Service Manual - Page 69
Removing the chassis fan, Prerequisites, Procedure
View all Dell XPS 8930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
40 Removing the chassis fan NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the right-side cover. 2. Follow the procedure from step 1 to step 2 in "Removing the power-supply unit". 3. Remove the blower and heat-sink assembly. (if installed) 4. Remove the VR heat sink. (if installed) Procedure 1. Remove the chassis-fan cable from the routing guide on the chassis-fan bracket. 2. Disconnect the chassis-fan cable from the system board. For more information, see "System-board components". 3. Remove the screw that secures the chassis-fan bracket to the chassis. 4. Slide the chassis-fan assembly towards the front of the computer to release the fan from the chassis. 5. Lift the chassis-fan assembly off the chassis. Figure 34. Removing the chassis fan 1. routing guide 3. #6-32x1/4'' screw 5. chassis-fan cable 2. chassis-fan bracket 4. chassis 6. system board Removing the chassis fan 69