Dell XPS 8930 Service Manual - Page 64
Removing the VR heat sink, Prerequisites, Procedure
View all Dell XPS 8930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
36 Removing the VR heat sink NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. NOTE: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it. CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can reduce the heat transfer capability of the thermal grease. Prerequisites 1. Remove the right-side cover. 2. Follow the procedure from step 1 to step 2 in "Removing the power-supply unit". 3. Remove the blower and heat-sink assembly. Procedure 1. Loosen the captive screws that secure the VR heat sink to the system board. 2. Lift the VR heat sink from the system board. Figure 32. Removing the VR heat sink 64 Removing the VR heat sink