Dell XPS 8930 Service Manual - Page 61
Removing the captive screws, Removing blower and heat-sink assembly
View all Dell XPS 8930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
b. blower 3. In a non-adjacent sequence as indicated in the figure below, loosen the captive screws that secure the heat-sink assembly to the system board. 4. Lift the heat-sink assembly off the system board. Figure 30. Removing the captive screws a. heat-sink assembly b. captive screws (4) c. system board 5. Disconnect the blower cable from the system board. For more information, see "System-board components". Removing blower and heat-sink assembly 61
b.
blower
3.
In a non-adjacent sequence as indicated in the figure below, loosen the captive screws that secure the heat-sink assembly to the
system board.
4.
Lift the heat-sink assembly off the system board.
Figure 30. Removing the captive screws
a.
heat-sink assembly
b.
captive screws (4)
c.
system board
5.
Disconnect the blower cable from the system board.
For more information, see “
System-board components
”.
Removing blower and heat-sink assembly
61