Dell XPS M1710 MXG061 XPS M1710 Service Manual - Page 40
Replacing the System Board
![]() |
View all Dell XPS M1710 MXG061 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
1 system board M2.5 x 5-mm screws (4) 23. Remove the system board, slowly easing the connectors out of their access holes on the back and side of the computer base: a. With the back of the computer facing you, grasp the upper-right corner of the system board and lift it slightly. b. Pull the system board assembly away from you toward the front of the computer and slightly to the right; at the same time, use your left hand to release the audio connectors by pulling the side of the computer base slightly to the left. 1 system board assembly Replacing the System Board 1. Replace in reverse order all of the components that you removed in Removing the System Board. NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
![](/manual_guide/products/dell-xps-m1710-mxg061-xps-m1710-service-manual-f98a3d9/40.png)