Dell XPS M1710 MXG061 XPS M1710 Service Manual - Page 63

Speakers, Removing the Speakers

Page 63 highlights

Back to Contents Page Speakers Dell™ XPS™ M1710 Service Manual Removing the Speakers Replacing the Speakers Removing the Speakers CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer. 1. Follow the instructions in Before Working Inside Your Computer. 2. Remove the hinge cover (see Removing the Hinge Cover). 3. Remove the keyboard (see Keyboard). 4. Remove the display assembly (see Removing the Display Assembly). 5. Remove the palm rest (see Removing the Palm Rest). NOTICE: Handle the speakers with care to help prevent damage to them. 6. Disconnect the speaker cables (one cable is the speaker LED cable) from the connector(s) on the system board. 7. Lift the tape (if present) that secures the speaker cables to the computer base, and disengage the cables from the cable guides. 8. Remove the four M2.5 x 5-mm screws from the speakers (two on each speaker). 9. Remove the speakers. 1 M2.5 x 5-mm screws (4) 2 cable guides 3 tape

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/speakers.htm[2/21/2014 11:23:57 AM]
Back to Contents Page
Speakers
Dell™ XPS™ M1710 Service Manual
Removing the Speakers
Replacing the Speakers
Removing the Speakers
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product
Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your
Computer
) before working inside the computer.
1. Follow the instructions in
Before Working Inside Your Computer
.
2. Remove the hinge cover (see
Removing the Hinge Cover
).
3. Remove the keyboard (see
Keyboard
).
4. Remove the display assembly (see
Removing the Display Assembly
).
5. Remove the palm rest (see
Removing the Palm Rest
).
NOTICE:
Handle the speakers with care to help prevent damage to them.
6. Disconnect the speaker cables (one cable is the speaker LED cable) from the connector(s) on the system board.
7. Lift the tape (if present) that secures the speaker cables to the computer base, and disengage the cables from the
cable guides.
8. Remove the four M2.5 x 5-mm screws from the speakers (two on each speaker).
9. Remove the speakers.
1
M2.5 x 5-mm screws (4)
2
cable guides
3
tape