Dell XPS M1710 MXG061 XPS M1710 Service Manual - Page 42
Display: Dell XPS M1710 Service Manual, Display Assembly
View all Dell XPS M1710 MXG061 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Back to Contents Page Display Dell™ XPS™ M1710 Service Manual Display Assembly Display Bezel Display Panel Display Latch Display Assembly Removing the Display Assembly CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer. 1. Follow the instructions in Before Working Inside Your Computer. 2. Turn the computer upside down and loosen the two captive screws on the Mini-Card cover. NOTE: You must detach the Mini-Card antennas (see step 3) before you can remove the display assembly. If a MiniCard is installed, disconnect the antenna cables from the card. If one is not installed, detach the antenna cables from their secured location. 3. Disconnect the antenna cables from the Mini-Card, if applicable.