Dell XPS M1710 MXG061 XPS M1710 Service Manual - Page 46
Display Bezel, Removing the Display Bezel
![]() |
View all Dell XPS M1710 MXG061 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Display Bezel 1 shoulder screws (4, two at the top and two at the 2 screw covers bottom) (2) 4 rubber screw-covers/display bumpers (6) 5 display bezel 3 M2.5 x 5-mm screws (4, one on each corner) Removing the Display Bezel CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer. 1. Follow the instructions in Before Working Inside Your Computer. 2. Remove the display assembly (see Removing the Display Assembly). 3. Remove the six rubber screw-covers/display bumpers. 4. Remove the two screw covers and the four shoulder screws. 5. Remove the four M2.5 x 5-mm screws at the corners of the bezel. NOTICE: Removal of the bezel from the display back cover requires extreme care to avoid damage to the bezel. 6. Use your fingers to separate the bezel from the display back cover by pulling the lower-right corner of the bezel down
![](/manual_guide/products/dell-xps-m1710-mxg061-xps-m1710-service-manual-f98a3d9/46.png)