Dell XPS M1730 M1730 XPS M1730 Service Manual - Page 37
Display Assembly, Removing the Display Assembly
View all Dell XPS M1730 M1730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
9 Display Assembly CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer. Removing the Display Assembly 1 Follow the instructions in "Before You Begin" on page 9. 2 Remove the hinge cover (see "Hinge Cover" on page 25). 3 Remove the keyboard (see "Removing the Keyboard" on page 27). 4 Remove the Mini Card cables from the Mini Cards if applicable (see "Wireless Mini Cards" on page 31). 5 Rotate the display assemblyassembly at an approximate angle of 90 degrees to the base. 6 Remove the four screws from the hinges. Display Assembly 37