Dell XPS M1730 M1730 XPS M1730 Service Manual - Page 42
Replacing the Display Panel, Removing the Display Panel Cable
View all Dell XPS M1730 M1730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
1 camera cable connector 2 3 screws (12) 4 display panel light lobes connector 6 Disconnect the light lobes connector using the pull-tab. 7 Remove the display panel. Replacing the Display Panel 1 Replace the light lobes connector. 2 Replace the eight screws that attach the display panel brackets to each side of the display panel. 3 Align the display panel with the display back and replace the four screws. 4 Connect the LCD camera cable to the display panel. 5 Route the cables back through their routing channels. 6 Replace the display bezel (see "Replacing the Display Bezel" on page 41). Removing the Display Panel Cable 1 Remove the display assembly (see "Removing the Display Assembly" on page 37). 2 Remove the display bezel (see "Removing the Display Bezel" on page 40). 3 Remove the display panel (see "Removing the Display Panel" on page 41). 4 Turn over the display panel, placing it on a clean surface. NOTICE: To avoid damage to the computer when replacing the bottom flex cable, gently support the bottom of the inverter board with one finger as you reseat the bottom flex-cable connector. Do not bend the inverter board. 5 Gently pull the pull-tab from the bottom flex-cable connector to release the cable from the inverter board. 6 Squeeze the flex-cable release levers at either side of the top flex-cable connector, releasing the connector. 42 Display Assembly