Dell XPS One 2710 Owner's Manual (PDF) - Page 133
Removing the Display Panel, Prerequisites, Procedure
View all Dell XPS One 2710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
60 Removing the Display Panel WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance. Prerequisites 1 Remove the back cover. See "Removing the Back Cover" on page 19. 2 Remove the stand. See "Removing the Stand" on page 47. 3 Remove the system-board shield. See "Removing the System-Board Shield" on page 31. 4 Remove the trim cover. See "Removing the Trim Cover" on page 87. 5 Remove the processor heat-sink fan. See "Removing the Processor Heat-Sink Fan" on page 75. 6 Remove the inner frame. See "Removing the Inner Frame" on page 95. Procedure 1 Disconnect the power-button cable from the system board and remove the power-button cable from its routing guides. 2 Disconnect the speaker cable from the system board and remove the speaker cable from its routing guides. 3 Disconnect the antenna cables from the wireless mini-card and remove the antenna cables from their routing guides. 4 Disconnect the camera and infrared-module cables from the system board and remove the cables from their routing guides. 5 Disconnect the display-power, touchscreen, and LVDS cables from the system board. Removing the Display Panel | 133