Dell XPS One 2710 Owner's Manual (PDF) - Page 95
Removing the Inner Frame, Prerequisites, Procedure
View all Dell XPS One 2710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
42 Removing the Inner Frame WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance. Prerequisites 1 Remove the back cover. See "Removing the Back Cover" on page 19. 2 Remove the stand. See "Removing the Stand" on page 47. 3 Remove the system-board shield. See "Removing the System-Board Shield" on page 31. 4 Remove the trim cover. See "Removing the Trim Cover" on page 87. 5 Remove the I/O panel. See "Removing the I/O Panel" on page 91. Procedure 1 Remove the screws that secure the inner frame to the computer base. 2 Gently pry the inner frame from the sides and lift the inner frame off the computer base. 1 2 1 screws (18) 2 inner frame Removing the Inner Frame | 95