Dell XPS One 2710 Owner's Manual (PDF) - Page 23
Removing the Converter Board, Prerequisites, Procedure
View all Dell XPS One 2710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
6 Removing the Converter Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance. Prerequisites 1 Remove the back cover. See "Removing the Back Cover" on page 19. Procedure 1 Lift the securing tab on the display-backlight cable connector and then disconnect the display-backlight cable from the convertor board. 2 Disconnect the converter cable from the converter board. 3 Remove the screws that secure the converter board to the computer base. 4 Lift the converter board off the computer base. 1 2 4 1 screws (2) 3 converter board 3 2 converter cable 4 display-backlight cable Removing the Converter Board | 23