Dell XPS One 2710 Owner's Manual (PDF) - Page 31
Removing the System-Board Shield, Prerequisites, Procedure
View all Dell XPS One 2710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
10 Removing the System-Board Shield WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance. Prerequisites 1 Remove the back cover. See "Removing the Back Cover" on page 19. Procedure 1 Remove the screws that secure the system-board shield to the computer base. 2 Lift the system-board shield off the computer base. 1 1 screws (8) 2 2 system-board shield Removing the System-Board Shield | 31
Removing the System-Board Shield
|
31
10
Removing the System-Board Shield
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1
Remove the back cover. See "Removing the Back Cover" on page 19.
Procedure
1
Remove the screws that secure the system-board shield to the computer base.
2
Lift the system-board shield off the computer base.
1
screws (8)
2
system-board shield
2
1