Dell Z9264F-ON EMC PowerSwitch BMC User Guide March 2021 - Page 12
Alert policies and destinations, LAN destinations, IPMI Specification v2.0, Event Filter Table
View all Dell Z9264F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
33 | disabled, configurable 34 | disabled, configurable 35 | disabled, configurable 36 | disabled, configurable 37 | disabled, configurable 38 | disabled, configurable 39 | disabled, configurable 40 | disabled, configurable For more information, see the IPMI Specification v2.0 chapter 17.7 Event Filter Table and chapter 30.3 Set PEF Configuration Parameters Command. Alert policies and destinations For more information, see the IPMI Specification v2.0 chapter 17.11 Alert Policy Table and chapter 30.3 Set PEF Configuration Parameters Command (parameter 9). LAN destinations BMC supports SNMP alert destinations. These alert destinations are SNMP traps. When you set a LAN destination for alerts, the BMC sends an SNMP trap to the set a destination whenever BMC detects alert conditions. You can setup the SNMP management application on the destination to receive these SNMP traps; however, setting up the SNMP management station is beyond the scope of this document. To view alert destinations, use the ipmitool lan alert print command. root@dellemc-diag-os:~# ipmitool lan alert print Alert Destination : 0 Alert Acknowledge : Unacknowledged Destination Type : PET Trap Retry Interval : 0 Number of Retries : 0 Alert Gateway : Default Alert IP Address : 0.0.0.0 Alert MAC Address : 00:00:00:00:00:00 Alert Destination : 1 Alert Acknowledge : Unacknowledged Destination Type : PET Trap Retry Interval : 0 Number of Retries : 0 Alert Gateway : Default Alert IP Address : 0.0.0.0 Alert MAC Address : 00:00:00:00:00:00 Alert Destination : 2 Alert Acknowledge : Unacknowledged Destination Type : PET Trap Retry Interval : 0 Number of Retries : 0 Alert Gateway : Default Alert IP Address : 0.0.0.0 Alert MAC Address : 00:00:00:00:00:00 . . . Alert Destination : 15 Alert Acknowledge : Unacknowledged Destination Type : PET Trap Retry Interval : 0 Number of Retries : 0 Alert Gateway : Default Alert IP Address : 0.0.0.0 Alert MAC Address : 00:00:00:00:00:00 You can configure up to 15 destinations. To configure destination 1 to send an alert to a machine with IP address 10.11.227.180: root@dellemc-diag-os:~# ipmitool lan alert set 1 1 ipaddr 10.11.227.105 Setting LAN Alert 1 IP Address to 10.11.227.105 12 Configuration methods