Dell Z9264F-ON EMC PowerSwitch BMC User Guide March 2021 - Page 13

Add and delete users, Alert policy setup

Get Dell Z9264F-ON PDF manuals and user guides View all Dell Z9264F-ON manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

The following output using the ipmitool lan alert print command shows that the configuration was successful: root@dellemc-diag-os:~# ipmitool lan alert print 1 1 Alert Destination : 1 Alert Acknowledge : Unacknowledged Destination Type : PET Trap Retry Interval : 0 Number of Retries : 0 Alert Gateway : Default Alert IP Address : 10.11.227.105 Alert MAC Address : 00:00:00:00:00:00 Alert policy setup To setup the alert policy, you must use the ipmitool raw command. To view the current policy table, use the ipmitool pef policy list command. root@dellemc-diag-os:~# ipmitool pef policy list 1 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 2 | 2 | enabled | Match-always | 1 | 802.3 LAN | PET | AMI | 0 | 0 | 10.11.227.105 | 00:00:00:00:00:00 3 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 4 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 5 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 6 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 7 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 8 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 9 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 10 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 . . . 57 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 58 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 59 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 60 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 There are 60 entries available for a policy table. The following example shows setting a policy entry. For a detailed description of the table entries, see the IPMI Specification v2.0 Alert policy table entry. root@dellemc-diag-os:~# ipmitool raw 0x4 0x12 0x9 0x2 0x28 0x11 0x00 root@dellemc-diag-os:~# ipmitool pef policy list 1 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 2 | 2 | enabled | Match-always | 1 | 802.3 LAN | PET | AMI | 0 | 0 | 10.11.227.105 | 00:00:00:00:00:00 3 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 4 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 5 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 6 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 7 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 8 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 9 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 10 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 . . . 57 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 58 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 59 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 60 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0 Add and delete users The following describes adding and deleting users: Configuration methods 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
The following output using the
ipmitool lan alert print
command shows that the configuration was successful:
root@dellemc-diag-os:~#
ipmitool lan alert print 1 1
Alert Destination
: 1
Alert Acknowledge
: Unacknowledged
Destination Type
: PET Trap
Retry Interval
: 0
Number of Retries
: 0
Alert Gateway
: Default
Alert IP Address
: 10.11.227.105
Alert MAC Address
: 00:00:00:00:00:00
Alert policy setup
To setup the alert policy, you must use the
ipmitool raw
command.
To view the current policy table, use the
ipmitool pef policy list
command.
root@dellemc-diag-os:~#
ipmitool pef policy list
1 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
2 | 2 | enabled | Match-always | 1 | 802.3 LAN | PET | AMI | 0 | 0 | 10.11.227.105 | 00:00:00:00:00:00
3 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
4 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
5 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
6 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
7 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
8 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
9 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
10 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
.
.
.
57 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
58 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
59 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
60 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
There are 60 entries available for a policy table. The following example shows setting a policy entry. For a detailed description of
the table entries, see the
IPMI Specification v2.0
Alert policy table entry
.
root@dellemc-diag-os:~#
ipmitool raw 0x4 0x12 0x9 0x2 0x28 0x11 0x00
root@dellemc-diag-os:~#
ipmitool pef policy list
1 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
2 | 2 | enabled | Match-always | 1 | 802.3 LAN | PET | AMI | 0 | 0 | 10.11.227.105 | 00:00:00:00:00:00
3 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
4 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
5 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
6 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
7 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
8 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
9 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
10 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
.
.
.
57 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
58 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
59 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
60 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0
Add and delete users
The following describes adding and deleting users:
Configuration methods
13