Dell Z9264F-ON EMC PowerSwitch BMC User Guide March 2021 - Page 21
Data 1-Protocol TCP and UDP, unblocked based on the state.
View all Dell Z9264F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Table 3. Firewall parameters (continued) Parameter # Remove the IPv4 address with timeout 15 rule Remove the range IPv4 address with 16 timeout rule Remove the IPv4 port number with 17 timeout rule Parameter data ● 17-minute Data 1:4-IP address ● MS-byte first. The IPv4 address type blocked or unblocked based on the state. ● Date 5:10-Start time ● [5:6]-Year ● LS-byte first if little endian system. Two-byte data required to form year. ● 7-month ● 8-date ● 9-hour ● 10-minute ● Date 11-16-stop time ● [11:12]-Year ● LS-byte first if little endian system. Two-byte data required to form year. ● 13-month ● 14-date ● 15-hour ● 16-minute Data 1:8-IP address ● [1:4]-Starting IP address blocked or unblocked based on the state. ● [5:8]-Ending IP address till IPs are blocked or unblocked based on the state. ● Date 9:14-Start time ● [9:10]-Year ● LS-byte first if little endian system. Two-byte data required to form year. ● 11-month ● 12-date ● 13-hour ● 14-minute ● Date 15-20-Stop time ● [15:16]-Year ● LS-byte first if little endian system. Two-byte data required to form year. ● 17-month ● 18-date ● 19-hour ● 20-minute Data 1-Protocol TCP and UDP ● 0 = TCP ● 1 = UDP ● 2 = both TCP and UDP ● Data 2:3-port number ● [2:3]-Port number from the ports blocked or unblocked based on the state. ● Date 4:9-Start time ● [4:5]-Year Configuration methods 21